|
Electronic Engineering Technician
| Details |
Country: USA
Location: California-San Diego San Diego, CA 92123
Total applied: 40 Job Category:Engineering
Relevant Work Experience:2+ to 5 Years
Education Level:High School or equivalent
Location:San Diego, CA 92123
Status:Full Time, Employee
Occupations:Electrical/Electronics Engineering
Career Level:Experienced (Non-Manager)
Relevant Work Experience:2+ to 5 Years
|
|
Electronic Engineering Technician
Dear Prospective Electronic Engineering Technician,
We have a great opportunity for just the right person. If our working environment, values and technical needs match well with your skills, values, personality and long term career goals, it could be a great win-win match up. We are looking for a long-term new addition to our team.
Summary:
This is a multi-functional support position for the engineering department. The position requires a wide range of knowledge: builds, tests, troubleshoots and repairs developmental and production electronic equipment following standard procedures. Position will assemble experimental circuitry as directed, working from instructions and technical manuals using knowledge of electronic systems, components and their functions. Set up and calibrate equipment to test circuitry, also conducts functional, operational, environmental, and life tests to evaluate performance and reliability. Adjusts, calibrates, aligns and modifies circuits and components. Administrating the document control process, must be able to document and organize test results and record effects on unit performance.
What we are looking for specifically with respect to this position:Someone who can perform board level reworkSomeone who has experience soldering through hole and fine pitch SMT componentsSomeone who has knowledge of power electronic circuitsSomeone who can build and test circuits with minimum supervisionSomeone who is experienced with proper use of standard test equipmentSomeone who is familiar with RLC circuitsSomeone who has knowledge of board layoutSomeone who has experience in editing schematicsSomeone who has experience in test fixture designSomeone who has video experienceSomeone who is able to read schematics and part data sheetsSomeone who can identify parts from schematics, assembly drawings, or actual assembliesSomeone who knows passive components (resistors, inductors, capacitors)Someone who knows active components (transistors, op-amps, logic)Someone who knows basic electronic laws-Ohms, Power, ImpedanceSomeone who has reasonably good math/algebraic skillsSomeone who can troubleshoot to the component levelSomeone who has experience with mechanical assembly
Who we are:
We are a manufacturing company that is entering our 25th year in business and currently employ 40 people. Our products are used in the underwater world www.deepsea.com and pleasure boating www.deepsee.com . We are a world leader in underwater lighting, video and pleasure boating Thru-Hull Lights. In October 2007 we moved into our new 36,000 square foot building where we plan to continue building and growing the business through innovative, yet focused new product development. Our goal is to maintain a moderate, but steady level of profitable growth in the future. In a competitive world, we play hard to win, and work to equip our employees with the tools that they need to get the job done.
What we look for in general:
· Someone who enjoys going to work each day, and learning new things
· Someone who wants a career and is not just looking for a job.
· Someone who is a hard worker and a team player
· Someone who does not have a history of job hopping.
· Someone who has good verbal and written communication skills.
· Someone who has a strong work ethic and integrity.
· Someone with some sort of sense of humor.
· Someone who can deal with sudden course changes as new ideas and opportunities emerge.
· Someone who is exceptionally good at what they do, and get things done.
· Someone we think we would enjoy working with, and vice versa.
· Someone who cares, who wants to make a difference.
· Someone who enjoys a challenging job, and who is perhaps still surprised that people want them to have fun doing it.
Any final applicant selected for our interview process should be prepared for several interviews. We make a large investment in trying to find the best match possible. We do need to know what your salary expectations are up front, so we can get on the same page early on. If we have not managed to scare you off at this point, and this sounds like a great place to work, please forward information supporting your interest in this position via email to jobs@deepsea.com . Please make sure to include “Job Code: “EET” and your name in the subject line of your email.
Sincerely,
DeepSea Power & Light, Inc.
|
| Related jobs |
|
|
Hardware Test Engineer
Job Description
Test development (HW and SW) for mobile communication devices and infrastructure products. Technologies supported include some combination of CDMA, GSM, ...
|
|
|
ASIC/FPGA Software Application Engineer (Semiconductor)
ASIC/FPGA Software Application Engineer - Semiconductor industry experience required.Responsibilities:* Identify and specify software/firmware needs for LiquidASIC, ...
|
|
|
Test Engineer
Panasonic's vision of the digital future is driven by the needs and aspirations of our business customers and millions of consumers around the world who use our products ...
|
|
|
Electro-Mechanical Assembler
Full Time, Temporary/Contract/Project Job Category: Installation/Maintenance/Repair ...
|
|
|
Multimedia SW/Systems Engineer -- Low Power Architecture and Design (All Levels)
Job Description
Hiring at all levels for low power, high performance, wireless-networked multimedia SoC architecture and design (Music-Player, mobile HDTV, Camera & C...
|
|
|
Financial Analyst, Senior- QUALCOMM Ventures
Job Description
Key position within QUALCOMM Ventures responsible for market investment-specific analysis and due-diligence as well as portfolio management and ...
|
|
|
SEA_Supply Chain Planner I
Position Summary
This position contributes to the overall logistics planning cycle for a specific product group or category. Provides sales support and supply chain ...
|
|
|
Cable Technician- Call (858)576-3140
Cable Technician- Call (858)576-3140Description: Volt Workforce Solutions as currently seeking experienced cable technicians to work on several projects.Volt's extensive ...
|
|
|
PDK CAD Engineer
--Work on a CAD team to develop state of the art Process Design Kits (PDKs) and provide technical CAD support for the mixed-signal design community at Analog Devices Inc....
|
|
|
Physical Design CAD Engineer, Senior
Job Description
Work with internal Physical Design teams and EDA vendors to develop and support the ASIC physical design flow. This position requires an overall ...
|
|
| Related press releases |
Courageous reform
There can be little doubt we are making progress when it comes to improving further education. More young people and adults than ever are gaining good qualifications ever...
|
|
Half of MG Rover workers want to return
Almost a year after the collapse of MG Rover, many former workers are paid less and wish they still worked for the firm, according to a report released today.
Of the nea...
|
|
Making ends meet
Earning some dosh to get through uni might seem unavoidable, but don't lose sight of the reason you are there: to get a degree. Earning shouldn't mean missing vital lectu...
|
|
|
|
The earth man cometh
I am merely the conduit,' says Patrick Holden, director of the Soil Association, when I ask him to sum up his achievement after 10 years in the job. 'The great thinkers, ...
|
|
Battle at the coalface
In his television review Rupert Smith described the NUM miners leader Arthur Scargill as "a ghastly little man who needed to be trodden on" (G2, March 23). I suppose he w...
|
|
Hutton eases small firms' pension fears
The government will not force employers to contribute to workers' pensions without making efforts to minimise the impact on firms, the work and pensions secretary, John H...
|
|
NHS hospital redundancies gather pace
A wave of redundancies across the NHS in England gathered force yesterday when a London teaching hospital announced that nearly 500 posts will be axed in an attempt to di...
|
|
Union warning over 'raw' stalls handlers
The Transport and General Workers Union (T&G) yesterday launched a fierce attack on the overall standard of the stalls handlers likely to be working at British racecourse...
|
|
Minimum wage to rise to £5.35
The minimum wage will rise by 6% in October to £5.35, the government confirmed yesterday, but it cautioned that the days of big, inflation-beating rises may be over...
|
|
|
|